Q: Can Lazervida cut metal?
Since the wavelength of the diode laser is 445 nm, the metal cannot be cut, but it can be directly engraved on stainless steel or the anodized aluminum alloy surface, but gold, silver, copper, and other metals cannot be engraved.
Q: How thickness can Lazervida cut on wood?
With a 10w laser head to cut light solid wood, the maximum depth can reach 8mm at a speed of 1 mm/s, and the cutting thickness depends on the material properties.
Q: Can Lazervida cut plastic or engrave PVC?
Due to the complex composition of plastic, it is recommended that you confirm with the material manufacturer whether the material contains dangerous substances for laser engraving. Please refer to the article in the help center, hazardous materials.
Toxic substances are not only harmful to the human body but also cause the machine to rust.
Q: Will Lazervida have fire safety concerns when cutting flammable materials (such as wood), and how to exhaust the smoke?
Lazervida is an open mechanism, so it is recommended to use it in a place with good ventilation. When cutting flammable materials, placing a small fire extinguisher in the area is recommended if there is a concern about the fire.